Sunday, July 18, 2010

Trex 450 Sport Wiring


Click for Larger View

The above diagram shows the typical wiring for a Trex 450 Sport RC helicopter. Take note of the following items:

  • The gyro pictured is the GP780 but would be the same for the older GP750.
  • The Aile and Pitch servos are interchangeable in that either can be placed on the left or right forward servo position and can be connected to either "Aile" or "Aux1" on the receiver.
  • Be sure all servo plugs are connected to the receiver with the black wire connected to the negative bus as indicated by the minus sign on the side of the receiver.
  • The yellow signal wire should connect to the receiver so that the plug aligns the yellow wire to the signal post. This is the post labeled with the symbol.

5 comments:

  1. Great write-up, I am a big believer in commenting on blogs to inform the blog writers know that they’ve added something worthwhile to the world wide web!.. http://usvaluebetting.com/

    ReplyDelete
  2. I really enjoyed reading this post, big fan. Keep up the good work andplease tell me when can you publish more articles or where can I read more on the subject? Fútbol mexico hoy

    ReplyDelete
  3. Friend, this web site might be fabolous, i just like it. 토토사이트

    ReplyDelete
  4. Thanks for posting this info. I just want to let you know that I just check out your site and I find it very interesting and informative. I can't wait to read lots of your posts. betano pt

    ReplyDelete
  5. This is a great article thanks for sharing this informative information. I will visit your blog regularly for some latest post.Free Mockup

    ReplyDelete